Here is a full list of the commands available on PAVO. These may be found in src/pavo/server/pavo_functs.c, with descriptions in pavo_control.c:

{"shutdown",shutdown_camera},

{"initcam",initialize_camera},

{"paramfile",user_load_analysis_settings},

{"coolon",cooler_on},

{"xbin",set_xbinning},

{"ybin",set_ybinning},

{"gain",set_emccd_gain},

{"exptime",set_exptime},

{"tint",set_exptime},

{"stopro",stop_acquisition},

{"start",resume_acquisition},

{"dark",dark_acquisition},

{"stop",stop_acquisition},

{"pause",pause_acquisition},

{"resume",resume_acquisition},

{"video",video},

{"acq",acquire},

{"cs",camera_speed},

{"sav",toggle_saving}:

{"disp",toggle_display}:
Turns displaying data on or off. Also opens and closes the applicable window.

{"compress",set_compression}:
Sets the compression mode for saving data.

{"threshold",set_threshold}:
Sets the threshold for photon counting.

{"pc",toggle_photon_count}:
Toggle photon counting in analysis.

{"back",toggle_background}:
Toggle taking background in analysis.

{"setiback",set_initial_background}:
Set the initial background. Really this funciton is only for debugging.

{"fore",toggle_foreground}:
Toggle taking foreground in analysis.

{"dispersion",toggle_dispersion}:
Toggle calculating dispersion.

{"avp",toggle_average_pupil}:
Toggle averaging the pupil for group delay.

{"pmap",save_phase_map}:
Save a phase map to correct for aberrations.

{"zpmap",user_zero_phase_map},

{"dispmode",set_display_mode}:
Sets the type of raw data display.

{"dispavg",set_display_avg}:
Sets the number of frames averaged for display.

{"ople",set_ople_params}:
Set the parameters for ople communications. !!! If this actually ends up being used, it needs some error checking...

{"oplereopen",open_ople_socket},

{"opleopen",open_ople_socket},

{"ldcopen",open_ople_socket},

{"tg",toggle_glass_servo},

{"opleclose",close_ople_socket},

{"opconopen",open_opcon_socket},

{"opttab2open",open_opttab2_socket},

{"ttopen",open_tt_socket},

{"settgt",set_zoom_target}:
Set the target for the zoomed-up display.

{"fsearch",user_fringe_search}:
Use the OPLE (i.e. for CHARA; OPCON for SUSI) cart to search for fringes.

{"fs",user_fringe_search},
Use the OPLE (i.e. for CHARA; OPCON for SUSI) cart to search for fringes.

{"servo",user_servo_set},

{"sv",user_servo_set},

{"frate",user_fringe_vel}:
User set a fringe velocity only.

{"fvel",user_fringe_vel}:
User set a fringe velocity only.

{"foffset",user_fringe_offset}:
Tell the fringe search algorithm where the fringes should be.

{"sdamp",set_servo_damping},

{"sgain",set_servo_gain},

{"sint",set_servo_int},

{"setas",set_servo_auto_search}:
Set the automatic fringe search parameters. Setting a velocity of zero turns automatic searching off. This setting is for all carts.

{"sas",start_servo_auto_search},

{"snon",set_sn_limit_on},

{"snoff",set_sn_limit_off},

{"stype",user_servo_type},

{"gdg",user_set_gd_gain},

{"shutter",start_shutter_sequence},

{"itime",set_integration_time},

{"airoffset",user_change_air_offset},

{"gddtime",set_gd_damping_time},

{"dtime",set_gd_damping_time},

{"autosave",set_auto_save}:
Turn automatic saving when fringes are found on or off.

{"dir",set_save_directory},

{"autostop",set_auto_stop}:
Turn automatic stopping on/off when shutter sequence is complete.

{"nsid",connect_to_n_sidcon},

{"ssid",connect_to_s_sidcon},

{"movensid",move_north_sid},

{"movessid",move_south_sid},

{"sg",set_slow_gain},

{"north",toggle_n_servo},

{"south",toggle_s_servo},

{"zero",zero_mirrors},

{"ntest",test_north},

{"stest",test_south},

{"signal",test_signal},

{"sttgain",set_south_gain},

{"nttgain",set_north_gain},

{"inidac",register_dac},

{"stop_highflux",toggle_stop_highflux},

{"scale",set_image_scale},

{"tas",toggle_auto_servo},

{"sal",set_south_auto_levels},

{"nal",set_north_auto_levels},

{"demod",set_sync_demod},

{"no",set_north_origin},

{"so",set_south_origin},